This article provides a complete guide on ATV helmets. Therefore , make sure that you read till the end.
How To Determine Helmet Size
A few steps must be taken to properly measure the head circumference and select the appropriate helmet size. In addition to this, you also need to learn more about modular helmets safety for better understanding.
- To begin, measure with a cloth flexible cloth measuring tape.
- Place one end of the tape in the middle of the user’s forehead to determine the most central or largest portion of the user’s head.
- Place the tape one inch above the brows and measure just above the ears to determine the head’s most central or largest portion.
- When measuring the circumference of the head, keep the tape as loose as possible.
- Again, take several measurements and choose the helmet size based on the largest one.
- You can never choose the correct size of an ATV helmet unless you have a proper circumference of the head. After selecting the largest measurement, you must consult the size chart to decide.
Accessories For ATV Helmets:
1. Goggles For ATV Helmets
Having goggles with an ATV helmet is a great way to ensure your safety on the bumpy, muddy, and dirty off-road. Some helmets include built-in goggles, while others include goggles with the helmet. The size is independent of whether or not it has goggles.
The built-in goggles will protect your eyes from debris, small rock fragments, and ultra-violet rays, among other things. This protection will ensure that you have a comfortable ride the entire time. As a result, you can keep your eyes open for an extended period regardless of the situation.
2. Face Shields For ATV Helmets
A helmet with a face shield is a far better choice than an open face or half helmet when it comes to safety. Manufacturers should use UV-resistant materials to make the face shield. For durability, the shield’s surface must be scratch-resistant.
Make sure the face shield you’re wearing is completely covering your face. Face shield should not interfere with the ventilation method and should have soft cushioning to soak up sweats for added comfort. Moreover, It should also have a locking mechanism. It may also help to stop helmet visor fogging problem.
3. Bluetooth Helmets For ATVs
Bluetooth riders are in high demand. Riders enjoy communicating with their fellow men while racing at high speeds. The Bluetooth mechanism is built into the helmet’s interior and can sometimes help prevent accidents from happening to other riders.
The built-in Bluetooth device typically allows up to four riders to connect during a ride. Because riders mostly use these in harsh environments, manufacturers should use the most recent versions with crystal clear sound quality. Some devices also include crash detection and an SOS dialer.
What Materials Are ATV Helmets Made Of?
Helmets used for ATV riding must be made of weather-resistant materials. Most manufacturers nowadays build the helmet’s frame out of polycarbonate, which is injection-molded. The exterior of the helmet should be scratch-resistant as well as UV-resistant.
There will be enough cushioning to make the seat soft and comfortable. Helmets should have a proper ventilation system on the forehead and chin to provide comfort during a long ride. This increased airflow through vents will reduce wind noise, which will aid in receiving clear outer noise.
How To Care For An ATV Helmet
The cleaning procedure is divided into two parts: cleaning the exterior and cleaning the interior.
- To begin, you must remove any removable parts of the helmet.
- To clean the exterior, use a soft cloth, a bucket of water, and a specific cleaner.
- Then, carefully read the user manual to determine whether the machine should wash the removable parts. If it is machine washable, your job will be much easier. If it isn’t, gently wash them with a soft cloth and cleaner.
- Finally, wipe the inside of the helmet with a cleanser to clean it.
Are ATV Helmets Expensive?
If you are not a professional ATV rider, you can purchase an affordable helmet for $100 to $200. On the other hand, pro riders are more concerned with safety and tend to spend more money on helmets. In this case, they spend more than $200 to $500 on a high-quality helmet.
Are ATV Helmets Useful?
Wearing a helmet can protect your head, face, and eyes while making your off-road ride more enjoyable. Rough weather, mud, dirt, and insects can make for an unpleasant riding experience. However, by wearing an ATV helmet, a rider can ensure a safe and interruption-free ride.
As a result, riding off-road without wearing a helmet is not a safe option. When it comes to ATV helmets, I must say that they are extremely beneficial.
1. Keeping Your Skull Safe
When an unfortunate accident occurs on the off-roads, the helmet acts as a life-saving component. It protects your skull from being struck by a small or large stone or rock, a branch of a tree, or some hard stuff.
The outer structure of the helmet is strong, but the inner side is cushioned for your comfort and safety.
2. Putting On A Mask
Riding becomes difficult when exposed to direct sunlight, dirt, or mud. You may also hit an obstacle unintentionally and injure your face. However, wearing a helmet with a face shield will protect your face from both dirt and excessive sunlight.
3. Keep Your Eyes Safe
If your helmet has a face shield or built-in goggles, it will protect your eyes from flying insects, debris, and other small particles. It will keep UV rays away from your eyes and allow you to see more clearly.
4. Giving You Better Hearing
It is critical to remain alert when driving on such roads, and a helmet can help you do so. An ATV helmet can help you hear better and stay connected to the outside world by reducing noise and wind fatigue.
Conclusion:
In conclusion, we can say that to choose the correct ATV helmet size, measure the circumference of the head and then compare it to the size chart provided above.
Also Read: Disadvantages of undersized ductwork
